1.Our dump trucks are divided into two types according to their application: Mining Dump Trucks and Common Dump Trucks.
Mining Dump Trucks: Heavy and super heavy dump trucks for non-road transport, suitable for overloading and poor road conditions in mines, water conservancy construction sites, super large construction sites, etc. Dimensions and axle loads are not restricted by highway regulations, the length of the carriage is generally below 5500mm.
Common Dump Trucks: Light, medium and heavy dump trucks for road transport, mainly transporting sand, coal, iron powder, steel slag, silt and other goods, the load capacity is generally up to 20-60 tons.
2.Our dump trucks are divided into two types according to their Lifting type: Ventral lift and front lift.
Ventral lift: The stroke of the cylinder is small, the manufacturing process of the cylinder is simple, the cost is low, the height of the mechanism is large, and the center of gravity is high. Applicable dimension in container: ≤5600mm.
Front lift: The center of gravity is low, generally 350mm. If the dimension in container is larger than 5600mm, using the front lift, the front lift will be more stable in lifting performance and stronger carrying capacity.
3. Our dump trucks engine emission standard: mainly Euro2,Euro3, Euro4. We will recommend dump trucks that meet the emission standards according to the oil products of each country.
4. The cab is divided into three categories: HW76: HOWO extended cab, single berth; HW79: HOWO high roof cab, double berth. Can be configured with low bumpers, high bumpers, and military bumpers, etc.
5. Rim/Tires: 12.00-20(Basic configuration); 12.00R20(radial tire ); 12.00R22.5, 295/80R22.5(tubeless).
According to your different needs, we will recommend different truck schemes for you
1.Products Detail:
6x4 Howo Dump Truck | |||
Key Performance | Driving speed(km/h): Max. Loading Capacity: 336Hp/371Hp engine for optional HW19710, 10 gears transmission With one berth | 75KM/h, 85KM/h for optional. 28000KG HW19710 Gear box with | |
Engine | Make: SINOTRUK Engine model: WD615.47, Euro II emission standard 4 stroke direct injection diesel engine 6 cylinder in-line with water cooling, turbo-charging & intercooling Maximum output: 371hp(273Kw) at 2200 rpm according to DIN. (option: 336hp,290hp) Maximum torque: 1500Nm at 1100~1600 rpm Bore: 126mm; Stroke: 130mm; Displacement: 9.726L; Compression ratio: 17:1 Specific fuel consumption: 198g/kWh; Engine oil filling quantity: 19L Cooling system filling quantity (long-term filling): 40L Thermostat opening temperature: 71oC Rigid fan | ||
Clutch | 430mm diaphragm spring clutch, hydraulic control with air assistance.WD615.47 engine standard is 430A model. | ||
Transmission | SINOTRUK HW series. Model HW19710. 10 gears transmission, transmission with main and auxiliary transmission structure. Main transmission with double counter shaft, auxiliary transmission with planetary reduction, with PTO. Ratio:10.73,7.89,5.91,4.38,3.29,2.45,1.82,1.35,1, 0.75 | ||
Front Axle | HR9, 9 ton, Steering with double T-cross section. Disc Brake. Option: drum brake. | ||
Rear Axles | AC16, 16ton. Double Reduction(central reduction+wheel reduction).Differential locks between wheels and axles Ratio: 5.45 option:4.77 Option: HC16, ration4.42, 4.8,5.73 | ||
Chassis | Frame: U-profile parallel ladder type with section of 300×80×8 mm, all cold riveted cross members Front suspension: Leaf spring suspension,10pcs,with shock absorber, transverse stabilizer. Rear suspension: Leaf spring suspension,12pcs,disconnected type with transverse stabilizer Spare wheel carrier: with one spare wheel Fuel tank: with 300 L fuel tank with locking fuel cap. | ||
Steering | ZF8118(Left Hand Drive) , hydraulic steering with power assistance. Option: Right Hand Drive | ||
Brakes | Service brake: dual circuit compressed air brake Parking brake :( emergency brake): spring storage energy without air. Auxiliary brake: Engine exhaust braking. Standard engine EVB. With ABS and optional auto clearance adjusting arm. | ||
Wheel & Types | Rims: 8.0-20, 10 hole-steel Types 12R20 Option: 12.00-20 tube 12R22.5 etc. | ||
Driver's cab | Standard cab, with one berth. All steel forward control, 55o hydraulically tillable to the front,2-arm windscreen wiper system with 3 speeds, laminate windscreen, with casted-in radio aerial, hydraulically damped adjustable driver's seat and rigid adjustable co-driver's seat, heating & ventilation system, adjustable roof flap, with stereo radio/cassette recorder, sun visor, and adjustable steering wheel, air horn, with 4-point support fully floating suspension and shock absorber. VDO instrument control module, double-locking safety belt. Option: Two Berth, | ||
Electrics | Operating voltage:24V, negative grounded; Starter: 24V, 7.5KW Alternator: 28V, 1500W; Batteries: 2×12, 165Ah Cigar-lighter, horn, headlamp, fog light, reverse lamp | ||
Dimensions in mm | Wheel base Front wheel track Rear wheel track Front overhang Rear overhang Approach angle(o) Departure angle(o) Overall Dimension Cargo body size | 3625+1350 2022 1850 1500 1670 19 26 8145×2496×3386(mm) 5400×2300×1300 (mm) (has different carriage size for option) | |
Weight in kg | Permissible loading capacity on chassis Dead weight Gross vehicle weight Front axle loading capacity Rear axle loading capacity | 12670 12200 25000 9000 16000×2 | |
Performance | Maximum driving speed(km/h) Maximum gradeablility (%) Minimum ground clearance(mm) Minimum turning circle(m) Fuel consumption(L/100km) | 75 50 314 16.3 28 |
2.Product pictures:
3.Product Line:
4. About us:
Shandong Hantang Machine Co., Ltd located in Jinan city, which has a registered capital of 5 million RMB. We are engaged in international business enterprises and recognized by the State Customs. The company is committed to generalize Chinese high quality, cost-effective construction machineries and vehicles to the world and bring more value experience to customers.
Based on this mission, Hantang Machine has established a long term cooperation with SINOTRUK, Which initially founded in 1956 and the cradle of Chinas heavy duty truck industry. Our main business is to export kinds of trucks and machineries such as dump trucks, tractor trucks, cargo truck, semi-trailers, special vehicles, light trucks, engines, transmissions, tires and all kinds of SINOTRUK spare parts, like HOWO parts, GOLDEN PRINCE parts HOHAN parts etc. These products have a good reputation in China for their stable performance, low maintenance cost high versatility of accessories and developed overseas after-sale service systems. What's more, it also can improve user's working efficiency, deserve to be trusted.
Supported by Sinotruk, we concentrate on customers, try our best to help users choosing suitable products and meet requirements of after-sale service, dispatch engineers to overseas markets to train drivers and maintenance workers. Superior product performance and attentive service help us to win more and more clients' trust and support in Africa, South America, Southeast Asia, Middle East, Russia etc. and established long-term cooperation with our constomers.
It is an arduous task and the road is long in the future, we will continue to work hard to bring more value for our partners and clients, faithfully spare no effort to meet all friends' expectations.
5. Our Costomers:
6. Forwarding:
7. FAQ:
Q: How to ship the vehicles?
A: By container, bulk ship, RORO.
Q: Do you have RHD(right hand driving) vehicles?
A: Yes, normally we supply all LHD vehicles, and we have some RHD model vehicles.
Q: What is your payment term?
A: We usually accept T/T or L/C depends on the quantity. TIT, deposit in advance, and balance before delivery from factory.
Q: What is your terms of delivery?
A: FOB, CIF
Q: How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q: How long is your product warranty?
A: One year