FL704-1
FL35-70 series
HOT SALE technical features:
Other terms:
1. Delivery: 30 days for normal orders
2. Price: We have price on basis FOB Qingdao and CIF your destination for your choice
3. Payment terms for first order:
-----T/T 30% deposit and balance before shipment
-----100% L/C at sight
ABOUT DEUTZ-FAHR MACHINERY CO.,LTD
DEUTZ-FAHR MACHINERY COMPANY LTD. is a subsidiary company of Italian SAME DEUTZ-FAHR GROUP. We are available to provide customers with a full range of products, including tractors, harvesters. Covered area 45,000 square meters with 700 employees. We adopt Italy SDF group quality control management system and advanced production system. So we can supply high reliability and good performance tractors and harvesters to the farmers from all over the world.
There are over 460 dealers and service channels covering all the market area. We take "satisfy the customers" as our target, provide "3 Full" (Full course, Full time, Full hearted) service.
After-sales service polices:
We take "satisfy the customers" as our target, provide "3 Full" (Full course, Full time, Full hearted) service.
FL35-70 series
HOT SALE technical features:
- Adopt famous six-cylinder turbocharger, powerful, fuel-efficient and energy conservation;
- 16+8 transmission, which can realize more shifts switch, able to meet different operation speeds requirements;
- Position mix controlled hydraulic system, enlarge tractor lifting force, able to meet marching with large implements requirements;
- Air-conditioning cabin, increased manipulation comfort.
| Main parameters | ||
| Type | FL704-1 | |
| Drive type | 4×4 four-wheel drive | |
| Engine | ||
| Engine Brand | QC | |
| Engine Type | QC4108T70 | |
| Max. Torque (Nm @ engine rpm) | ≥265-275/1700 | |
| Fuel tank capacity L | 32L | |
| Rating power of engine KW/RPM | 29.4 | |
| Fuel consumption @ nominal power (g/kw.h) | ≤238 | |
| Air Intake Type | Naturally Aspirated | |
| Displacement L | 4.324 | |
| Air filter type/size | ||
| Torque reserve | ≥20% | |
| Transmission system | ||
| Clutch type/size | One-piece,dry,double-action/13 inches | |
| No. of gears (F+R) | 8F+2R | |
| Shift method | mechanical sliding sleeve | |
| Max. speed | 29.91km/h | |
| Gear position | side position | |
| Hydraulic system | ||
| Hydraulic output flow rate (L / MIN) | 38.4 | |
| Hydraulic output valve | Three groups | |
| Hydraulic filter types and capacity | wire mesh/63μm | |
| Working device | ||
| Three-point-linkage | 2 Type | |
| PTO Speed | 540/760rpm 540/1000rpm(optional) | |
| Lifting Capacity (kn) | 15KN(Enforced lift optional ) | |
| Tillage depth adjustment | position,float,draft,draft mix control | |
| Parameter | ||
| The whole machine size (dimensions) mm | 4060×1828×2200 | |
| Min. operation mass | 2660/2380 | |
| Wheel base (mm) | 2071 | |
| Mini turning Radius (m) | 4.5 | |
| Rated traction force(N) | 16.5 | |
| Minimum ground clearance (mm) | 370 | |
| Air conditioning cab | Optional | |
| Front/rear wheel tread | 1350/1450(common1940) | |
| tyre size | 8.3-24/14.9-30 | |
| Braking and steering | ||
| Braking system | hydrostaticpedal control,disc brake, | |
| Steering type | hydraulic steering | |
| Steering Angle (4 x4) | Front axle Max.Steering angle 45° | |
| (options: all these types can Optional for swing drawbar, front/rear ballast) | ||
Other terms:
1. Delivery: 30 days for normal orders
2. Price: We have price on basis FOB Qingdao and CIF your destination for your choice
3. Payment terms for first order:
-----T/T 30% deposit and balance before shipment
-----100% L/C at sight
ABOUT DEUTZ-FAHR MACHINERY CO.,LTD
DEUTZ-FAHR MACHINERY COMPANY LTD. is a subsidiary company of Italian SAME DEUTZ-FAHR GROUP. We are available to provide customers with a full range of products, including tractors, harvesters. Covered area 45,000 square meters with 700 employees. We adopt Italy SDF group quality control management system and advanced production system. So we can supply high reliability and good performance tractors and harvesters to the farmers from all over the world.
There are over 460 dealers and service channels covering all the market area. We take "satisfy the customers" as our target, provide "3 Full" (Full course, Full time, Full hearted) service.
After-sales service polices:
- FARMLEAD tractor is offered 12 months of warranty period of the tractor, which shall start from the 3 month as the shipment date.
- FARMLEAD will offer free service parts in warranty period, and there is no charge for related work hours and indirect expenses.
- Service training
We take "satisfy the customers" as our target, provide "3 Full" (Full course, Full time, Full hearted) service.