Electrostatic Spray Antique Black Copper Powder Coating for Metal Application
Hammer tone texture powder coating is an advanced method of applying a decorative and protective finish. This type of powder coating provide excellent toughness, durability, thickness and decorative effect. This textured surface is more resistant to abrasion, chipping, scratching, fading, chemical corrosion and wearing than other finishes. It will seal the trailer well from the corrosive action of harsh environment conditions. It is the longest lasting and most color-durable quality finish. Colors stay bright and vibrant longer. It is also designed for hiding surface imperfections. Now you can have excellent performing finish that not only does the job but also looks great.
| Weather Resistant TGIC Polyester Powder Coatings for Exterior and Interior Application. | ||||||||||
| Features: | Good weather resistance, good mechanical properties, very smooth flow, good storage stability, good coverage. | |||||||||
| Gloss Level: | All colors featured in this chart are available as standard products in smooth glossy with a gloss level of 80-90+ | |||||||||
| Typical Applications: | Residential windows and doors, garden equipment, patio furniture, automotive accessories, bicycles, motorcycles, sporting goods. | |||||||||
| Highly Weather- and UV-Resistant Powder Coatings based on Super Durable TGIC Polyester for Exterior and Interior Applications. | ||||||||||
| Features: | Superior gloss and color retention, excellent weather resistance, good mechanical properties, superior chalk resistance, smooth flow, excellent edge coverage, good storage stability. | |||||||||
| Gloss Level: | All colors featured in this chart are available as standard products in smooth glossy with a gloss level of 80-90. | |||||||||
| Typical Applications: | Agricultural and construction equipment, bus shelters, lighting fixtures, playground equipment, site furnishings, garage doors, stadium seating, fencing, automotive equipment, and marine applications. | |||||||||
CURING CONDITIONS
180 °C ~ 200 °C (work piece temperature), 10-15 minutes
AVERAGE COVERAGE
8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)
PACKING
Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.
Mechanical property | ||
Testing items | Standards and methods | Inspecting index |
Impact strength | GB/T1732-1993, AS3715 2.8 | >50kg/cm |
Bending resistance | GB/T1185-88, AS1580 402.1, ISO9227 | Pass 2-5 millimeters |
Adhesion CHECKED TEST | GB/T9286-88,2mm Cross cut, ISO2409 | Pass100/100, passes 0 levels |
Cupdrawing:Erichsen, ISO1520 | Erichsen, ISO1520 | Pass 3-7 millimeters |
Pencil hardness | GB/T6739-86, Mitsubishi | Pass H-2H |
Chemical resistance and weather resistance | ||
Salt spray test | GB/T1771-91,500 hours | The cross section of corrosion less than 2MM |
Hot and damp resistance test | GB/T17740-79(89),1000 hours | Without air bubbles, loses the light slightly |
Acid resistance | 10% CH3COOH, 240 hours | Without air bubbles, the surface without damage |
Alkali resistance | 10% NaOH, 240 hours | Without air bubbles, the surface without damage |
Heat resistance | 200degree,1 hour | The color change is lower than E=1.5 |
Solvent resistance | MEK24 hours soaked in solvent-free | Without air bubbles, the surface without damage |
Uvioresistant | QUV-313,500 hours | Gloss higher than 80% lower than the Munsell color change level |
Water tolerance of | 2 hours | No bubble, not falling, losing light |
We offer free samples to you.
You can contact me informatoin as follows,
Attn:Danae